Description
XUB-80V2, our big 50kw peak bruiser is now moving to its second generation which is the same external dimensions but new improved mechanical internal design, improved material selection now resulting in even more efficiency giving you real world more range and even smoother power delivery, nice and predictable feel for enduro technical riding and full wrist splitting power curve for that infinite power pull we all loved from the previous version!
The new version comes with:
- New encoder cap
- New JDM aesthetics
- Upgraded materials internally
- 40kw continuous and 50kw peak
- 5-10% more efficiency
- Smoother predictable power curve
- Comes with hardware, keyway, washers and nut for shaft
- Shaft same dimensions as previous
We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.
The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.
In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.
Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result they can deliver a smoother more responsive and controllable powerband and they do not generate the same type of current spikes that often cause controller issues. Furthermore, they contribute to improved low-end torque control and overall motor response.
EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller.
| XUB-80 Motor (Ultra Bee) | |
| PEAK POWER | 50000W |
| VOLTAGE RANGE | 48v – 104v |
| MAX TORQUE | 65Nm |
| MAX STABLE ROTOR RPM | 12000RPM |
| MAX EFFICIENCY | 94% |
| MOTOR CONFIGURATION | 10 poles and 12 slots |
| WINDING TYPE | Dual Y parallel connection |
| STATOR AND ROTOR STACK THICKNESS | 80MM |
| SENSING METHOD | NJDC 605 Encoder |
| KV Value | 85~90KV |
| Rated power | Air cooled: |
| 15.5KW(28 minutes)
28KW (continuous run 2 min 20 seconds) |
|
| Water cooled: | |
| 18KW(28 minutes) | |
| Max Phase current | 1100A |
| Rated Phase current (Continuous run) | 500A (35Nm) |
| Motor temperature | 180 deg C windings |
| 140 deg C start limiting | |
| 160 deg C power cut | |
| Waterproofing | IP67 |
| Anti-corrosion | Yes |
| Colors | Black with Black End Cap |
| Black with Red End Cap | |
| Black with Blue End Cap | |
| Black with Gold End Cap | |
| Black with Purple End Cap | |
| Weight/Size | Air cooled: |
| OD181.5mm*L138mm 14KG | |
| Water cooled: | |
| (TBD) | |
| Warranty | 2 Year |
Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.
IMPORTANT SAFETY CONSIDERATIONS:
- NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
- EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
- USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
- UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
- ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
- KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
- RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.
By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.
Enjoy the thrill of our motors responsibly and with safety as your utmost priority.
